Such a drive is characterized by a high precision and stability of operation, moreover, has substantially no parts to be replaced over time. The electronically controlled motor is placed directly under the plate mounted on the axle. The rubber belt is becoming worn over time, that's why it should be replaced with a new one regularly.Īnother type of drive is direct-drive, invented by Technics. The advantages of the belt drive is quiet operation and lack of acoustic impact on the turntable's output signal. The latter is connected to the outer or inner rim of the bottom of the plate via rubber belt. The most common drive is a belt drive, which uses low-speed engine with the pulley. In those devices user has to manually start the playing, but after the end of the LP mechanism automatically stops the motor. The intermediate type of construction are semi-automatic turntables. When plaing is over, the mechanism automatically turns off the motor and/or raises the arm and moves it on the footer. On the other hand, automatic turntables are equipped in start/stop buttons, which are sending orders to automatically start and stop playing the record.
#PROJECT CARBON PRO MANUAL#
Manual turntables are, for example, Pro-Ject RPM Carbon series. Furthermore, when playing is over, LP should be stopped manually. In manually controlled turntables all of actions related to the playback - raising the arm, moving it to the desired place above the record - of LP must be done by the user.
0 kommentar(er)
